Modem/Module board & Services

Our Services

RFCOM Technologies offers services as an Independent Design House (IDH) in development of wireless systems, modems & modules for Internet of Things (IoT) solutions. It requests in-depth knowledge and experience in areas of Radio Frequency (RF) hardware & software development, wireless communication standards and test methodologies.

If you are interested in cooperation – please contact us.

Our Products

RFCOM Technologies provides a series of products for IoT solutions in inventory tracking, healthcare, building automation and etc.

RTM3993 UHF Reader Interface Board

RTM3993 Interface Board is used for customer evaluate RTM3993 UHF Reader Modem Board performance as well as software development. By configuring proper interface to developing product, customer can easily use RTM3993 to development end product's software and hardware performance.

Details
RTM96 CAT-M1/NB1 Modem Board

RTM96 LTE CAT-M1/NB1 modem board is designed with Quectel LTE BG96 Cat.M1/NB1 cellular module. It is able to perform LTE CAT-M1 and NB1 dual mode communication at ultra-low power consumption. RTM96 is powered by Renesas Synergy S5D3 with built-in MQTT/TLS protocol and wireless frameworks designed for the IoT market. RTM96 can enable better / wider coverage for network-connected devices, e.g. Electrical Meter, Environment Monitoring devices and etc. RTM96 LTE CAT-M1/NB1 modem board is not only the best choice of GPRS replacement but also an ideal module for customer to develop their application software in fast time-to-market. The pre-programmed firmware enables customers to directly connect to Synergy Enterprise Cloud Toolbox Dashboard and various on-board digital & analog interfaces give user extensive flexibility in the choice of sensor connectivity for the application. RTM96 CAT-M1/NB1 modem board has the advantage of compact size, Synergy software solutions and rich interfaces design for IoT market.

Details
RFCOM 1Phase CPX3 PLC Modem Board

RFCOM Single-Phase CPX3 PLC module is a high-performance Narrow Band Power Line Communication (NB-PLC) modem Board. It uses Renesas Third Generation Flexible PLC Modem IC "R9A06G037" solution. As default, RFCOM Single-Phase PLC Module is turned with band FCC-150KHz-450KHz. By fine-tuning the components on-board, it can also applicable to Cenelec band Cenelec-A-63kHz. RFCOM Single-Phase CPX3 PLC module offers great advantage over other PLC solutions, i.e. 1) Low power consumption and low noise interference; 2) High memory headroom for future standard evolution and dual route communication; 3) Including certified software stacks with no additional license fees. By using RFCOM CPX3 PLC module together with RFCOM T&H Sensor Board and RFCOM 3-phase PLC Basebaord, it is able to build a system at low cost and early stage. The communication data can be propagated through AC or DC power line. It is effective for wiring saving in building automation [HVAC, (air conditioning), Fire & Safety, building security, lighting] etc.

Details
RFCOM 3Phase CPX3 PLC Modem Board

RFCOM 3-Phase CPX3 PLC module is a high-performance Narrow Band Power Line Communication (NB-PLC) modem Board. It resolves 3-phase cross-line blocker issue in Building Automation application. It uses Renesas Third Generation Flexible PLC Modem IC "R9A06G037" solution. As default, RFCOM 3-Phase PLC Module is turned with band FCC-150KHz-450KHz. By fine-tuning the components on-board, it can also applicable to Cenelec band Cenelec-A-63kHz. RFCOM 3-Phase CPX3 PLC module offers great advantage over other PLC solutions, i.e. 1) Low power consumption and low noise interference; 2) High memory headroom for future standard evolution and dual route communication; 3) Including certified software stacks with no additional license fees. By using RFCOM CPX3 PLC module together with RFCOM T&H Sensor Board and RFCOM 3-phase PLC Basebaord, it is able to build a system at low cost and early stage. The communication data can be propagated through AC or DC power line. It is effective for wiring saving in building automation [HVAC, (air conditioning), Fire & Safety, building security, lighting] etc.

Details
RFCOM RH/T Sensor Board

RFCOM Humidity & Temperature sensor board is a low-cost, easy-to-use, highly accurate, pre-programmed sensor device. This sensor board is ideal for environmental sensing and data logging for building automation or air-conditioning control system. When customer plug in on-board PMOD interface, by pre-programmed on-board Renesas RL78/G12, as default you’ll have every 2-seconds relative humidity readings and very accurate temperature readings. There are only four pins One for Vcc, one for GND, and two data lines for UART communication. This humidity & temperature is directly plug & play with RFCOM PLC Baseboard Board.

Details
RTBTM01 BLE Module Evaluation Kit

RTBTM01 Evaluation Kit is used for customer evaluate RTBTM01 BLE module performance as well as software development. By configuring proper interface to developing product, customer can easily use RTBTM01 evaluation kit to development end product's software and hardware performance.

Details
RFCOM CPX3 PLC Baseboard

RFCOM PLC Baseboard is fully designed to suit both RFCOM PLC CPX3 Single-phase and 3-phase Modem Board. This baseboard provides the required voltage supply to PLC Modem Board as well as the interface expansion to the purpose of CPX3 PLC modem board development, connect peripherals interfaces, e.g. USB, UART. While RFCOM T&H sensor board plugs in the Baseboard via PMOD port, the PLC modem board could be quickly deployed on-site in Building Automation HTAV system. RFCOM PLC Baseboard is powered by either 220-240VAC or +5VDC. The single AC power supply feature allows user to eliminates the DC power adapter in real deployment. RFCOM PLC Baseboard is able to configure PLC operation +12V/+15V different voltage subject for better Signal-To-Ratio (SNR) enhancement. In addition, the on-board UART-to-USB converter, tester points and PMOD (UART/I2C) connector provides the easy adaptation of various off-the-shelf t sensors in the market.

Details
RTBTM01 BLE PMOD Breakout Board

RTBTM01 PMOD Breakout Board is designed to connect to the host controller as a plug-and-play BLE device through PMOD interface. This PMOD can support UART/SPI/I2C communication. The default setting is UART communication.

Details
RTT7807 Electronic Tag With Sensors

RFCOM Electronic Tag RTT7807 are fully developed by RFCOM Technologies Pte Ltd, used in hotel / hospitality / logistic / inventory tracking application, where tags are attached to guest's luggage, removable trolley, removal targets and other inventories. It has alert feature with flashing & beeping which can be trigger by concierge or logistic team member in the integrated application. RTT7807 has embedded sensors of T&H and Accelerometer to detect the ambient environment and vibration. QR code enable user to register the tag in the backend system where build-in encryption and unique Tag ID provides extra security in the deployment. Tags can last up to 3 months from a single full charge or longer by adjusting the operation interval time. The name card sized tag can be easily adapted into solution for wide range of scenario such as hotel, hospitality, logistic, healthcare, robotic navigation and location tracking system.

Details
RTGM0X GPRS Modem Board

Product Profile: RTGM0X series Universal GPRS Modem Board is able to perform GPRS communications interfacing Backend Server (HES) and user devices i.e. Electrical Meter, Environment Monitoring devices and etc. It has built-in algorithm and programmable parameters to meet various use cases requirement. It provides TCP/IP and UDP protocols and multiple TCP sockets can be configured and established at one time for TCP connections or UDP sockets. With its build in SMTP client, it could simultaneously send device’s data by email. The SMS feature provides another alternative communication path in some applications. Build-in AT Commands & Profiles give user extensively flexibility of parameter’s configuration ability in the application. RTGM0x GPRS Modem Board customizes compact physical slot-in design for Electrical Meter or other devices.

Details
RTT7806 Electronic Tag

RFCOM Electronic Tag RTT7806 are fully developed by RFCOM Technologies Pte Ltd, used in hotel / hospitality / logistic / inventory tracking application, where tags are attached to guest's luggage, removable trolley, removal targets and other inventories. It has alert feature with flashing & beeping which can be trigger by concierge or logistic team member in the integrated application. QR code enable user to register the tag in the backend system where build-in encryption and unique Tag ID provides extra security in the deployment. Tags can last up to 3 months from a single full charge or longer by adjusting the operation interval time. The name card sized tag can be easily adapted into solution for wide range of scenario such as hotel, hospitality, logistic, healthcare, robotic navigation and location tracking system.

Details
RTBTM01 Bluetooth Low Energy Module

RTBTM01 is a Bluetooth low energy module based on Renesas MCU RL78/G1D Bluetooth® Low Energy Protocol Stack. It is among the lowest power consumption Bluetooth Smart modules. The protocol stack is compliant with Bluetooth ver. 4.2 specifications. This module has integrated RF Antenna, crystals, DC/DC inductor to make it easy to be used in the application product without requesting know-how of sensitive circuitry and RF design technics.

Details

Recent Posts